Standards
IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/100Base-FX, IEEE802.3x
Forward and Filtering Rate
14,880pps for 10Mbps
148,810pps for 100Mbps
Packet Buffer Memory
768K bits
Processing Type
Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control
Power
Input
Input Voltage: 10 to 48VDC (Terminal Block); 12VDC (DC Jack)
Power Consumption
4.32W MAX. 0.36A @ 12VDC, 0.09A @ 48VDC
Overload Current Protection
Present
Reverse Polarity Protection
Present
Mechanical
Casing
Aluminum case
IP30
Dimensions
50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
Weight
0.8Kg (1.76lbs.)
Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting
Interface
Ethernet Port
10/100BASE-TX: 1 port
100BASE-FX: 1 port
LED Indicators
Per Unit: Power Status (Power 1, Power 2, Fault),Link-Fault-Pass-Through
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision,Speed
100FX: Link/Activity, Full-duplex/Collision
Relay Contact
Relay contact rating with current 1A @ 30VDC,0.5A @ 120VA
Environment
Operating Temperature
-40°C to 75°C (-40°F to 167°F)Tested @ -40°C to 85°C (-40°F to 185°F)
Storage Temperature
-40°C to 85°C (-40°F to 185°F)
Ambient Relative Humidity
5% to 95% (non-condensing)
Regulatory Approvals
ISO
Manufactured in an ISO9001 facility
Safety
Hazardous locations: Class 1, Division 2 group A,B,C&D UL60950-1, EN60950-1, IEC60950-1
EMI
FCC Part 15, Class A
EN61000-6-3
- EN55022
- EN61000-3-2
- EN61000-3-3
EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria B
Air: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 1000MHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM
Criteria A
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)
NEMA TS1/2 Environmental requirements for traffic control
equipment
EL900-X-Y-I-P
Hardened 10/100BASE-TX to 100BASE-FX Media Converter
10/100TX Options :
(X) = A : 10/100BASE-TX (for Port 1 only)
100FX Fiber Options :
(Y)=B :Multi Mode (SC)
C :Multi Mode (ST)
D :Multi Mode (SC) WDM -TX:1310nm/RX:1550nm -2Km
E :Multi Mode (SC) WDM -TX:1550nm/RX:1310nm -2Km
F :Multi Mode (SC) WDM -TX:1310nm/RX:1550nm -5Km
G :Multi Mode (SC) WDM -TX:1550nm/RX:1310nm -5Km
Q :Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km
R :Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km
S :Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km
T :Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km
M :Single Mode (ST) -20Km
N :Single Mode (SC) -20Km
O :Single Mode (SC) -40Km
*More 100FX Fiber options also available upon request
Installation Type :
(I) = 1 : DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480
Power Connector Options :
(P) = A : Terminal Block* / B : DC Jack**
*Options A -The Terminal Block type external power supply are not included. Please order the following part numbers, as required:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X X=1,2,3,4,5
**Options B -The external power adapter and power cord are not included. Please order the following part numbers, as required:
41-136044-X X=1,2,3,4,5