Hardened 10/100/1000BASE-TX to 1000BASE-SX/LX/BX Media Converter

• Complies with NEMA TS1 & TS2 Environmental requirements for Traffic control equipment
• Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment
• DIP switch configuration for "Link-Fault-Pass-Through", fiber auto/force mode, link down alarm
• 10/100/1000Mbps-Full-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Full wire-speed forwarding rate
• Alarms for power and port link failure by relay output
• Redundant power inputs with Terminal Block and DC Jack
• -40°C to 75°C (-40°F to 167°F) operating temperature range
• Hardened aluminum case
• Supports DIN-Rail, Panel or Rack Mounting installation

Technology

Standards
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T, IEEE802.3z 1000BASE-SX/1000BASE-LX, IEEE802.3x
 

Forward and Filtering Rate
1,488,100pps for 1000Mbps

Power

Input
Voltage: 12 to 48VDC (Terminal Block);
12VDC (DC Jack)
 

Power Consumption
7.68W Max, 0.16A @ 48VDC
 

Overload Current Protection
Present
 

Reverse Polarity Protection
Present
 

Mechanical

Casing
Aluminum case
IP30

Dimensions
50mm (W) x 110mm (D) x 135mm (H)
(1.97" (W) x 4.33" (D) x 5.31" (H))
 

Weight
0.8Kg (1.76lbs.)
 

Installation
DIN-Rail (Top hat type 35mm), Panel, Rack Mounting

Interface

Ethernet Port
10/100/1000BASE-TX: 1 port
1000BASE-SX/LX/BX: 1 port

LED Indicators
Per Unit: Power Status (Power1, Power2, Power3, Fault), LFPT
Per Port: 10/100/1000TX: Link/Activity, Speed, Full-duplex/Collision
1000SX/LX/BX: Link/Activity
 

Relay Contact
Relay contact rating with current 1A @ 30VDC,
0.5A @ 120VAC
 

Environment

Operating Temperature
-40°C to 75°C (-40°F to 167°F)
Tested @ -40°C to 85°C (-40°F to 185°F))
 

StorageTemperature
-40°C to 85°C (-40°F to 185°F)
 

Ambient Relative Humidity
5% to 95% (non-condensing)
 

Regulatory Approvals

ISO
Manufactured in an ISO9001 facility
 

Safety
UL508
 

EMI
FCC Part 15, Class A
EN61000-6-4
- EN55022
- EN61000-3-2
- EN61000-3-3
 

EMS
EN61000-6-2
- EN61000-4-2 (ESD Standards)
Contact: + / - 4KV; Criteria B
Air: + / - 8KV; Criteria B
- EN61000-4-3 (Radiated RFI Standards)
10V/m, 80 to 2.7GHz; 80% AM Criteria A
- EN61000-4-4 (Burst Standards)
Signal Ports: + / - 4KV; Criteria B
D.C. Power Ports: + / - 4KV; Criteria B
- EN61000-4-5 (Surge Standards)
Signal Ports: + / - 1KV; Line-to-Line; Criteria B
D.C. Power Ports: + / - 0.5KV; Line-to-earth; Criteria B
- EN61000-4-6 (Induced RFI Standards)
Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A
- EN61000-4-8 (Magnetic Field Standards)
30A/m @ 50, 60Hz; Criteria A
 

Environmental Test Compliance
IEC60068-2-6 Fc (Vibration Resistance)
5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage Transport)
IEC60068-2-27 Ea (Shock)
25g @ 11ms (Half-Sine Shock Pulse; Operation)
50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport)
IEC60068-2-32 Ed (Free Fall)
1M (3.281ft.)

EL9100-X1B
10/100/1000BASE-TX to 1000BASE-SX/LX/BX Hardened Media Converter
 

Gigabit Options
(X) =
3 : 1000BASE-SX (SC) - 550m
4 : 1000BASE-SX (SC) - 2Km (1310)
5 : 1000BASE-SX (ST) - 550m
A : 1000BASE-LX (SC) - 10Km
B : 1000BASE-LX (SC) - 20Km
H : 1000BASE-LX (ST) - 10Km
I : 1000BASE-LX (ST) - 20Km
R : 1000BASE-BX (SC) WDM -TX:1310nm/RX:1550nm - 20Km
S : 1000BASE-BX (SC) WDM -TX:1550nm/RX:1310nm - 20Km
 

Power Supply : (Optional)
*Option A - The Terminal Block type external power supplyies are not included. Please order the following part numbers:
DR-30-24, DR-60-24, DR-75-24, DR-120-24 or 41-136046-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
**Option B - The external power adapter and power cord are not included. Please order the following part numbers:
41-136044-X
(X)=1: US, 2: EU, 3: UK, 4: AU, 5: JP
 

Installation Type :
DIN-Rail (mounting kit is included)
Optional Panel mount kit, part number: KP-AA96-480