10/100BASE-TX to 100BASE-FX Media Converter and Chassis Manager

• System Change - Device Name, New Password, Old Password, Version, MAC address
• IP Configuration - DHCP, IP address, Netmask, Default Gateway
• Chassis Hardware Monitor - Temperature, Supply Voltage Value, Fan Status, Active MC, Uptime
• CO MC Status - Operation Status, Link Status, Receive Count, Drop Count, Collision Count
• CO MC Control - Forwarding Mode, Remote Control, Link Fault Pass Through, Port Mode, Flow Control, MDIX, Output Rate, Input Rate, Informing Way for Receiving Off
• CPE MC Auto Report
• CPE MC Status - Status of power, Status of receiving optical power, Terminal link status, MC status, Informing way for Receiving off, Status of loopback test, Notification of link status for the terminal, Terminal link speed, Duplex for the terminal, Capability of auto-negotiation for the terminal, Number of interface in Terminal
• CPE MC Control - Forwarding Mode, Remote Control, Link Fault Pass Through, Port Mode, Flow Control, MDIX, Output Rate, Input Rate, Informing Way for Receiving Off
• Loopback Test
• MC Hardware Monitor - Temperature, Supply Voltage
• SNMP Configuration - System Contact, System Location Get Community, Set Community
• Alarm - Alarm Configuration, Hardware Alarm Configuration, Alarm Mail-Trap, Alarm SNMP-Trap
• TFTP Client for Software Upgrade
• Telnet, SNMP V1 & V2, Web Browser, and TFTP Management
• Enterprise MIB
• 128K bits buffer memory
• Built-in CPU with 2M Bytes Flash & 8M Bytes SDRAM
• 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX
• Full wire-speed forwarding rate
• 0°C to 45°C (32°F to 113°F) operating temperature range
• Aluminum case
• Supports expansion when used with EMMC800M Managed Media Converter Chassis
• Hot-swappable in any slot when used with EMMC800M Managed Media Converter Chassis

Technology

Standards: IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/100BASE-FX,IEEE802.3x

Protocols: SNMP V1/V2, TFTP RFC 783, IP RFC 791, ICMP RFC 792
TCP RFC 793, SMTP RFC 821, Telnet RFC 854, HTTP RFC 2068

Forward and Filtering Rate: 14,880pps for 10Mbps
148,810pps for 100Mbps

Packet Buffer Memory: 128K bits
Built-in CPU with 2M Bytes Flash & 8M Bytes SDRAM

Processing Type: Store-and-Forward
Half-duplex back-pressure and IEEE802.3x full-duplex flow control

Power

Input: Input Voltage: 12VDC

Power Consumption: 4.2W Max. 0.35A@12VDC

Mechanical

Casing: Aluminum case

Dimensions: 80mm (W) x 124mm (D) x 20mm (H)
(3.15" (W) x 4.88" (D) x 0.79" (H))

Weight: 160g (0.35lb.)

Installation: Expansion use with EMMC800M Managed Media Converter Chassis

Interface

Ethernet Port: 10/100BASE-TX: 1 port
100BASE-FX: 1 port

Console Port: Port: One RJ45 Ethernet port

LED Indicators: Per Unit: Power Status (Power, Failure Alarm)
Per Port: 10/100TX: Link/Activity, Full-duplex/Collision ,100FX: Link/Activity, Console: Activity, Full-duplex/Collision

Environment

Operating Temperature: 0°C to 45°C (32°F to 113°F)

Storage Temperature: -10°C to 70°C (14°F to 158°F)

Ambient Relative Humidity: 5% to 95% (non-condensing)

Regulatory Approvals:

ISO: Manufactured in an ISO9001 facility.

Emission Compliance: CE Mark Class A, FCC Part 15 Class A

EMM100WC
10/100BASE-TX to 100BASE-FX Multi Mode (SC)

EMM100WT
10/100BASE-TX to 100BASE-FX Multi Mode (ST)

EMM100WC-20
10/100BASE-TX to 100BASE-FX Single Mode (SC) -20Km

EMM100WC-40
10/100BASE-TX to 100BASE-FX Single Mode (SC) -40Km

EMM100WC-75
10/100BASE-TX to 100BASE-FX Single Mode (SC) -75Km

EMM100WT-20
10/100BASE-TX to 100BASE-FX Single Mode (ST) -20Km

EMM100WCA-20
10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm -20Km

EMM100WCB-20
10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm -20Km

EMM100WCA-40
10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1310nm/RX:1550nm -40Km

EMM100WCB-40
10/100BASE-TX to 100BASE-BX Single Mode (SC) WDM -TX:1550nm/RX:1310nm -40Km
 

8-Bay Managed Media Converter Chassis

EMMC800M
8-Bay Managed Media Converter Chassis